Print Page | Close Window

Seam on Top of the Bow

Printed From: Sailrite Enterprises, Inc.
Category: Canvas Work
Forum Name: Boat Tops
Forum Discription: Questions about Biminis and Dodgers
URL: http://forum.sailrite.com/forum_posts.asp?TID=3660
Printed Date: 14 November 2019 at 11:02pm


Topic: Seam on Top of the Bow
Posted By: jdhorner8
Subject: Seam on Top of the Bow
Date Posted: 18 December 2018 at 2:06pm
I would like to place the seam at the aft bow of a dodger on top of the bow instead of on the back side of the bow so the tails can pass over the top of a welded handhold. Is there a problem with the seam landing on top of the bow? Will it make the system weaker or less waterproof?

Thanks!
Julian



Replies:
Posted By: MattGrant
Date Posted: 18 December 2018 at 2:52pm
No problem at all. Just make sure you use this patterning location for all pieces that will join at this location.

-------------
Best Regards,
Matt Grant
Sailrite



Print Page | Close Window