Print Page | Close Window

Fabricator broken needles

Printed From: Sailrite Enterprises, Inc.
Category: Sewing Machines
Forum Name: Sailrite Sewing Machines
Forum Discription: The use and maintenance of Sailrite Sewing Machines
URL: http://forum.sailrite.com/forum_posts.asp?TID=3643
Printed Date: 12 December 2018 at 2:29am


Topic: Fabricator broken needles
Posted By: aoconstruction
Subject: Fabricator broken needles
Date Posted: 08 October 2018 at 11:43pm
I've been getting lot of broken needles on my fabricator but it typically only happens when i reverse to lock in a stich. Please advise.
                Thanks  Alan




Replies:
Posted By: MattGrant
Date Posted: 09 October 2018 at 8:39am
Hi Alan, We will need to start a support case to figure this out. Please fill out the form at www.sailrite.com/support and we can provide the assistance needed.

-------------
Best Regards,
Matt Grant
Sailrite


Posted By: Tejas
Date Posted: 11 October 2018 at 4:12pm
Look at the second post from Tejas in the following link for a sewing trouble-shooting guide that lists several causes and solutions for needle breaking.

http://leatherworker.net/forum/topic/67749-can-ya-help-a-girl-out/

-------------
Beneteau First 36.7

Juki LU-1508N
Bernina 217N with CAM Reader
Singer 99 with hand crank



Print Page | Close Window