Print Page | Close Window

Adhesive Backed Dacron

Printed From: Sailrite Enterprises, Inc.
Category: Sailmaking
Forum Name: Sail Repair
Forum Discription: Repairing Sails
URL: http://forum.sailrite.com/forum_posts.asp?TID=3084
Printed Date: 30 September 2020 at 5:32am


Topic: Adhesive Backed Dacron
Posted By: Licorice
Subject: Adhesive Backed Dacron
Date Posted: 08 December 2014 at 4:18pm
I have a laminate sail that had adhesive backed Dacron UV stripes on.< id="pageBrightnessCustom">body{zoom:163%!important;}
The UV stripes have been taken off but there is some "tackiness" still remaining on the laminate.
What can I use to remove this sticky residue from the laminate?

Thanks,
sam :-)


Replies:
Posted By: MattGrant
Date Posted: 09 December 2014 at 10:05am
3M Adhesive Remover or Goo Gone will work well.


-------------
Best Regards,
Matt Grant
Sailrite

Posted By: Licorice
Date Posted: 09 December 2014 at 4:10pm
Thanks Matt - I'll try it!

sam :-)

Posted By: Sail Warehouse
Date Posted: 07 January 2017 at 10:27pm
I realize this is late reply to an old post but if you just need to kill the stickiness, using talcum powder is a quick and easy way to do it. Works well for removed insignias, sail numbers, draft stripes etc.

-------------
Jim Johns
www.thesailwarehouse.com


Print Page | Close Window