Print Page | Close Window

Gas Grill Cover

Printed From: Sailrite Enterprises, Inc.
Category: Canvas Work
Forum Name: Covers and Awnings
Forum Discription: Canvas covers of all varieties
URL: http://forum.sailrite.com/forum_posts.asp?TID=2795
Printed Date: 27 November 2022 at 7:46pm


Topic: Gas Grill Cover
Posted By: wingless
Subject: Gas Grill Cover
Date Posted: 15 November 2013 at 10:22am

The http://www.magmaproducts.com/Products/Marine_Products/Gas_Barbeque_2/A10-215/a10-215.html" rel="nofollow - - big floppy bag covers sold by Magma for the grill, so I designed and built my own.

The design has six segments, five identical saucerazoid shaped panels and a sixth panel that is larger, more rectangular, to fit over the handle and the igniter button.
 
FYI, this video shows the proper pronunciation for Magma.
 
 
http://www.youtube.com/watch?v=UNJU-5vCrJc" rel="nofollow -


Assembling Saucerazoid Panels

Assembly Complete


Cover Zipper


Grill and Cover Interior


Grill and Cover Installed



-------------
2000 SeaRay 380 Sundancer
Mercruiser 454 MAG MPI
Horizon 380hp
Westerbeke 7.0KW BCGB
many cool mods

Juki DNU-1541S
Consew CSM550



Replies:
Posted By: wingless
Date Posted: 17 November 2013 at 9:00pm

These images show my http://www.magmaproducts.com/Products/Marine_Products/Gas_Barbeque_2/Gas_005/Gas005_Mounting/Gas005_175/gas005_175.html" rel="nofollow - - Combination Control Valve / Regulator http://magmaproducts.com/shopsite_sc/store/html/product818.html" rel="nofollow - Turbo Venturi Tube cover / holder.

The http://www.magmaproducts.com/Products/Marine_Products/Gas_Barbeque_2/A10-205___215_Manual.pdf" rel="nofollow -
 
This valve bag permits proper storage.
 
 
Rod Mount Cover w/ Pattern
 
Rod Mount and Cover
 
Rod Mount in Cover

Valve / Regulator / Venturi and Cover
 
Valve / Regulator / Venturi in Cover


-------------
2000 SeaRay 380 Sundancer
Mercruiser 454 MAG MPI
Horizon 380hp
Westerbeke 7.0KW BCGB
many cool mods

Juki DNU-1541S
Consew CSM550


Posted By: wingless
Date Posted: 24 November 2013 at 7:13pm

The gas grill on my boat uses disposable propane cylinders.

These propane cylinders must be stored properly, to protect the steel tank from water / rust and to ensure that the very flammable, heavier-than-air propane does not accumulate on-board if the tank should ever leak. There are many requirements for storage of propane on a boat.
 
This http://www.magmaproducts.com/Products/Grill_Accessories/A10-210PBJB/a10-210pbjb.html" rel="nofollow - Magma propane tank storage bag is one way to carry these tanks properly.
 
These images show the cannister storage bag I made to carry two 16.4 oz propane tanks. The bag is suspended from the bow rail, so any potential leakage would fall safely off the boat. The fabric is Sunbrella Supreme, so the tanks are protected from water / rust.
 
The webbing is http://www.sailrite.com/Webbing-Polyester-1-White-1500" rel="nofollow - 1" polyester selected for UV resistance.
 







-------------
2000 SeaRay 380 Sundancer
Mercruiser 454 MAG MPI
Horizon 380hp
Westerbeke 7.0KW BCGB
many cool mods

Juki DNU-1541S
Consew CSM550


Posted By: Allan
Date Posted: 24 November 2013 at 8:26pm
Boy you sure have put a lot of thought into these covers
Well done

Allan

-------------
Queensland, Australia


Posted By: SEADRAGON34
Date Posted: 06 June 2016 at 11:47am
Hi,
Great job, will you share your pattern?
I also need a grill cover.
Thanks,
SeaDragon 34


-------------
Sea Dragon 34'


Posted By: Sue2
Date Posted: 20 June 2016 at 6:00pm
Nice!


Posted By: wingless
Date Posted: 29 July 2017 at 4:21pm
The topic was reworked to replace the PB extortion images w/ Flikr images.

-------------
2000 SeaRay 380 Sundancer
Mercruiser 454 MAG MPI
Horizon 380hp
Westerbeke 7.0KW BCGB
many cool mods

Juki DNU-1541S
Consew CSM550



Print Page | Close Window