best way to sew strataglass window to sunbrella

  Most often its normal to sew in support around the outer edges of the sunbrella prior to installing the glass.. you use a stiffer material as "shelter-rite" offered by sailrite as it gives support to the sunbrella.. On some pannels when installing glass, If there is only a couple inches, I'll run the glass all the way to the outer edge and use a 2 inch facing around the edge. or trim the combination of the glass and fabric with a binding.. it plays hell with the next person to replace the window but sure looks good to start with.

I always sew the glass in over the Sunbrella. Then cut the Sunbrella out. I think you will find this solves the problem although there is nothing wrong with adding reinforcement as well (but, again, cut the fabric away only after the window is sewn in place).

I watched the video seems simple enough. Is there anyway to fix what i have or i'm i going to have to make a new side curtain?

    actually it not that hard.. and it something that has to be done on most "Searays" out today.. They build the pannel with the glass and then run a 2 or 3 inch border around the edge making the glass the re-inforcement pannel..